★ Dual Overhead Tank System Sri DIGITEK Dual Overhead Tank Controller ULDX-HA-02-DT
Model: ULDX-HA-02-DT | Heavy Duty 30A Relay System

Sri DIGITEK® Dual Overhead Tank Water Level Controller

Engineered specifically for single-phase submersible and monoblock pumps managing **two separate overhead tanks (T1 & T2)**[cite: 9]. This advanced heavy-duty system automatically switches ON the pump whenever either overhead tank drops below 50%, and switches OFF only when *both* tanks reach 100% capacity[cite: 9].

⚡ Dual Overhead Tank Control (T1 & T2) 📊 50% & 100% Level Tracking per Tank 🛡️ Heavy Duty 30 Amps Relay Direct Drive 💧 Live Water Flow Indicator ⚡ 180V - 250V AC Voltage Cut-Off

⚙️ Key Features & Operating Logic

Smart Dual Tank Switching Logic

Automatically triggers the pump ON when *any* overhead tank falls below 50%, and switches OFF once *both* tanks are fully filled to 100%[cite: 9].

Independent 2-Level Tank Probes

Monitors 50% and 100% level stages independently across both overhead tanks (T1 and T2), paired with a 3-stage underground sump indicator[cite: 9].

Heavy Duty 30 Amps Relay

Equipped with a robust 30A relay capable of handling motors directly without requiring an external magnetic starter[cite: 9].

Advanced Dry-Run Protection

Detects dry running conditions caused by faulty foot valves or pipeline air leaks, shutting down the pump automatically with a fault indication[cite: 9].

Voltage Protection & Surge Defense

Features built-in surge protection and automatic voltage cut-off if supply voltage drops below 180V or exceeds 250V AC[cite: 9].

Manual, NEED & Bypass Switches

Includes Auto/Manual soft switch for utility tasks, an optional NEED switch for forced activation, and a Rocker Bypass Switch for failure overrides[cite: 9].

📋 Technical Specifications

Model Code ULDX-HA-02-DT (Heavy Duty Dual Overhead Tank Controller)[cite: 9]
Manufacturer Smart Care Systems
Relay Rating 30 Amps Heavy Duty Relay (Direct connection for motors above 1 HP)[cite: 9]
Application Configuration Single-Phase Submersible/Monoblock Sump Pumps with TWO Overhead Tanks (T1 & T2)[cite: 9]
Tank Level Stages 2 Levels per Overhead Tank (50% & 100%) + 3 Stages for Sump[cite: 9]
Working Voltage Cut-Off Below 180V AC or Above 250V AC[cite: 9]
Special Features Water Flow Indication, Dry-Run Protection, Surge Defense, and Soft-Touch NEED Switch[cite: 9]

🏡 Ideal Applications

Properties with Two Overhead Tanks

Designed for residential or commercial buildings featuring two separate storage tanks fed by a single common pump[cite: 9].

Single-Phase Submersible & Monoblocks

Directly drives high-capacity motors up to and above 1 HP using an integrated heavy-duty 30A relay[cite: 9].

Multi-Level Apartments

Automates synchronization between a sump and dual roof tanks without requiring manual intervention[cite: 9].

GET
QUOTE